莊書豪(Chuang Shu-Hao), 教授
電話 04-2840433 ext.305　　
傳真 04-2877170　
E-mail shchuang@mail.nchu.edu.tw

學歷

畢/肄業學校

國別

主修學門系所

學位

起訖年月

台灣大學

中華民國

機械工程研究所

博士

1982/9至1986/6

清華大學

中華民國

動力機械工程研究所

碩士

1977/9至1979/6

中原大學

中華民國

機械工程學系

學士

1973/9至1977/6

與專長相關之經歷

服務機關

服務部門/系所

職稱

現職：國立中興大學

機械工程學系

教授

經歷：國立中興大學

機械工程學系

副教授

國立中興大學

機械工程學系

講師

中信營造工程公司

工程部

機械技師(民61)

國立台北工專

機械工程學科

 		　

專長

1.E2熱流機械

2.EI航太工程

3.EC能源科技

研究方向
1.熱水器強制燃燒系統 2.不銹鋼管製程系統

3.張力感測特性與應用研究 4.消防工程與防火材料研究

教授課程

大學部

工程數學(一)、(二)

研究所

可壓縮流體力學、燃燒學

碩專班

 工程分析學（一）、可壓縮流體力學、工程分析學（二）

研究計劃

計劃名稱

擔任工作

起訖年月

輔助機構
先進飛行載具氣動外形匿蹤研究 主持人 93 年 01 月 01 日 ~ 93 年 12 月 31 日 國科會
表面粗糙度對NACA系列機翼流場與渦漩結構特性之影響分析與探討(I) 主持人 92 年 08 月 01 日 ~ 93 年 07 月 31 日 國科會
提升產業技術及人才培育研究計畫—提昇光機引擎散熱系統設計之研究 主持人 （92年計畫） 國科會
動態高攻角氣動力試驗技術研究(I) 主持人 92 年 01 月 01 日 ~ 92 年 12 月 31 日 國科會
NACA系列機翼作簡諧擺盪時渦漩結構特性之探討 主持人 91 年 08 月 01 日 ~ 92 年 07 月 31 日 國科會
NACA機翼系列作簡諧擺盪時其表面時變壓力之實驗分析 主持人 90 年 08 月 01 日 ~ 91 年 07 月 31 日 國科會

張力感測單元濾波特性分析方法研究

主持人

88/08~89/07

精密機械研究

發展中心

高負荷熱水器之強制燃燒系統性能實驗及數值分析

主持人

88/08 ~89/07

國科會

提昇瓦斯爐燃燒器頭良好燃燒範圍及熱效率之研究

主持人

87/08~88/07

國科會

高負荷熱水器在各種空燃比下之性能分析

主持人

86/08~87/07

國科會

作俯仰運動之直昇機旋轉機翼表面時變壓之實驗分析

主持人

84/08~85/07

國科會

比例閥穩壓特性之研究

主持人

86/07~87/06

櫻花公司

抗風排氣筒之最佳化參數分析研究

主持人

86/07~87/06

櫻花公司

熔接食品級沃斯田鐵不銹鋼之研究

主持人

87/11~88/10

昌翰工業公司

論文發表(Publications)

期刊論文

  1. Chuang, Shu-Hao, and Hong, Zuu-Chang, 1985, "Turbulent Reacting Flow Analysis of the Multiple Plane Jets", TRANS. of AASRC, Vol. 18, pp. 1-12.
  2. Hong, Zuu-Chang, and Chuang, Shu-Hao, 1986, "Kinetic Theory Approach of the Multiple Plane Jets Turbulent Mixing Analysis", J. of CSME, Vo1.7, No.5, pp.361-372 (EI).
  3. Chuang, Shu-Hao, 1986, "Synthetical Analysis among the Various Plane Jets Turbulent Combustion", J. of the College of Science and Eng., NCHU, Vol.23, pp. 165-188.
  4. Chuang, Shu-Hao, 1986, "Kinetic Theory Approach of the Twin Plane Jets Combustion Analysis", J. of the College of Science and Eng., NCHU, Vol.23, pp.155-164.
  5. Chuang, Shu-Hao, 1987, "Space Convergence Method for the High- Order Two-Point Boundary Value Problem", J. of the College of Science and Eng., NCHU, Vol.24, pp. 107-120.
  6. Chuang, Shu-Hao, and Shieh, S. M., 1988, "Computer Aided Design of Boiling and Boiler", Metal Industries, Vo1.22, No. 1, pp. 14-24.
  7. Hong, Zuu-Chang, and Chuang, Shu-Hao, l988, "Kinetic Theory Approach to Twin Plane Jets Turbulent Mixing Analysis", AIAA Journal, VoL.26, No.3, pp.303-310 (SCI,EI).
  8. Chuang, Shu-Hao, and Lii, Shen-Wu, 1988, "Reacting Flow Analysis of an Afterburner with Two V-Gutter Flameholders", TRANS. of AASRC, Vol.21, pp.39-54.
  9. Hsiao, F. B., Leou, K. M., Sheu, S. S., and Chuang, Shu-Hao, 1988, "A Study of Effects of a 2-D Jet Impinging on a Flat Plate", TRANS. of AASRC, Vol. 21, pp.l-14.
  10. Chuang, Shu-Hao, 1988, "Combustion Flowfield Analysis of an Afterburner with V-Gutter Flameholders", J. of CSE, NCHU, Vol. 25, pp. 155-180.
  11. Chuang, Shu-Hao, 1989, "Discrete Vortex Method with Viscous Effect to Simulate a Sudden Expansion Comustor Folwfield", Metal Industries,Vol. 23, No. 2, pp. 49-61.
  12. Chuang, Shu-Hao, 1989, "Numerical Simulation of an Impinging Jet on a Flat Plate", International Journal for Numerical Methods in Fluids, Vol. 9, No. 11, pp. 1413-1426 (EI).
  13. Chuang, Shu-Hao, and Sung, Hong-Ming, 1989, "Numerical Simulation of the Sudden-Expansion Dump Combustor with Reacting Flow", J. of Eng, NCHU, Vol. 1, pp. 57-72.
  14. Chuang, Shu-Hao, and Jiang, Jium-Shean, 1990, "Diffusion Flame Analysis of and Afterburner as a Function of the Air-Fuel Ratio", Int. J. Numer. Methods Fluids, Vol. 11, No. 3, pp. 303-316 (EI).
  15. Chuang, Shu-Hao, and Jiang, Jiunn-Shean, 1990, "Hot Flow Simulation of an Afterburner with Different Shape of Flameholders", J. of Feng-Chia University, Taichung, Taiwan, R. O. C., Vo1.23, pp. 279-314.
  16. Chuang, Shu-Hao, and Wei Ching-Yuan, 1991, "Computations for a Jet Impinging Obliquely in a Flat Surface", Int. J. Numer. Methods Fluids, Vol. 12, No. 7, pp. 637-653 (EI).
  17. Chuang, Shu-Hao, Tai, Fang-Mei, and Sung, Hong-Ming, 1992, "Hot Flow Analysis of Swirling Sudden-Expansion Dump Combustor", Int. J. Numer. Methods Fluids, Vol. 14 , No. 2, pp.217-239 (EI).
  18. Chuang, Shu-Hao, Hong, Zuu-Chang, and Wang, Jhy-Horng, 1991, "Multiple-Plane-Jet Turbulent Mixing Analysis via a Kinetic Theory Approach", Int. J. Numer. Methods Fluids, Vol. 13, No. 1, pp. 83-107 (EI).
  19. Chuang, Shu-Hao, and Hong, Zuu-Chang, 1991, "Diffusion Flame Analysis of the Twin Plane Jets via Kinetic Theory Approach", Int. J. Numer. Methods Fluids, Vol. 13, No. 3, pp.341-354 (EI).
  20. Chuang, Shu-Hao, Chen, Ming-Hua, and Lii Shen-Wu, 1991, "Numerical Simulation of an Impinging Twin-Jet with Cross Flow", J. of Engineering, NCHU. Vol. 2, pp. 83-104.
  21. Chuang, Shu-Hao, Kuo, Hung-Pin, and Lin, Cheng-Kuang, l99l, "Diffusion Flame Analysis of an Afterburner with Two Fuel-Ring Spargers as a Function of Pitch", J. of Eng., NCHU, Vol. 2, pp.65-82.
  22. Chuang, Shu-Hao, Kuo, Hung-Pin, Lin, Cheng-Kuang, and Wang, Y. J., 1991, "An Afterburner with Two Fuel-Ring as a Function of the Pitch Spargers", J. of Eng., NCHU, Vol. 2, pp.65-80.
  23. Chuang, Shu-Hao, Chen, Ming-Hua, and Lii , Shen-Wu, 1991, "Numerical Simulation of an Impinging Twin-Jet with Cross Flow", J. of Engineering, NCHU, Vol. 2 , pp.83-104.
  24. Chuang, Shu-Hao, Chen, Ming-Hua, and Lii, Shen-Wu, 1992, "Numberical Simulation of Twin-Jet Impingement on a Flat Plate Coupled with Cross-Flow", Int. J. Numer. Methods Fluids, Vol.14, No4, pp.459-475 (EI).
  25. Chuang, Shu-Hao, and Lin, Song-Yih, 1992, "Numerical Simulation of Fuel Sparger on an Afterburner Flow", J. of Eng., NCHU, Vol. 3, pp.69-84.
  26. Chuang, Shu-Hao, Lin , Hsun-Chen, Chen, Ming-Hua, and Jan, Jin-Fa, 1992, "Theoretical Investigation of Combustion Characteristics in Ram-Jet Dump Combustor with Side Inlet", Int. J. Num. Methods Fluids, Vol. 15, No. 10 , pp. 1197 -1212 (EI).
  27. Chuang, Shu-Hao, Lin, Hsun-Cheng, and Sung, H. M., 1992, "Hot Flow Analysis of Swirling Sudden-Expansion Dump Combustor", Int. J. Numer. Methods Fluids, Vol. 14, No. 2, pp.217-239 (EI).
  28. Chuang,Shu-Hao, Lin, Song-Yih, and Jung, Juin-Shy, 1992, "Numerical Simulation of Fuel Sparger on an Afterburner Flow", J. of Engineering, NCHU, Vol.3, pp.69-84 .
  29. Chuang, Shu-Hao, and Chen, Ming-Hua, 1992, "Computations of Twin-Jet Impingement on a Flat Surface", CMSE J, Vo1. 13, No. 5, pp.391-400 (EI).
  30. Chuang, Shu-Hao, Lin, Hsun-Cheng, Chen, Ming-Hua, and Jan, Jin-Fa, 1992, "Theoretical Investigation of Combustion Characteristics in Ram Jet Dump Combustor with Side-Inlet", Int. J. Num. Methods Fluids, Vol. 15, No. 10, pp. 1197-1212 (EI).
  31. Chuang, Shu-Hao, and Hong, Zuu-Chang, l994, "HF Chemical Laser Analysis of Twin Plane Jets via a Kinetic Theory Approach", Int. J. Num. Meth. Heat Fluid Flow, Vol. 4, No. 6, pp.513-526 (EI).
  32. Chuang, Shu-Hao, Huang, Chih-Yuan, and Shyu, R. N., l994, "The Effect on Wind and Tail for Wing Rock on Aircraft with Experiment Investigation", Trans. of AASRC, Vol. 26, No. 3, pp. 183-193.
  33. Chuang , Shu-Hao, Chen, Deng-Fa, and Shyu, Lih S., 1995, "The Investigations of Model Wake Blockage Corrections in A.R.L. Low Speed Wind Tunnel", Trans. of AASRC, Vol. 27, No.l, pp.13-22.
  34. Chuang, Shu-Hao, Kuo, Cheng-Hsiung, and Ho, Sen-Tin, 1995, "Cold Flow Characteristics of an Axisymmetric V-Type Flameholder", Trans. of AASRC, Vol. 27, No. 4, pp.307-319.
  35. Chuang, Shu-Hao, Hong, Zuu-Chang, and Wang, Jhy-Hong, 1996, "The Application of Turbulent Kinetic Theory to a Reacting Flow of Turbulent Plane Jet", Int. J. Num. Meth. Heat Fluid Flow, Vol. 8, No. 2, pp.153-168 (EI).
  36. Chuang, Shu-Hao, Hong, Zuu-Chang and Wang, Jhy-Hong, 1998, “The Application of Turbulent Kinetic Theory to a Reacting Flow of Turbulent Plane Jet”, Int. J. Num. Meth. Heat Fluid Flow, Vol. 8, No. 2, pp. 153-168 (EI, SCI).
  37.  Chuang, Shu-Hao and Cheng, Po-Jen, 1999, “The Block Effects of an Impinging Twin-Jet on a Flat Plate”, Trans. of AASRC, Vol.31, No. 2, pp.151-162 (EI).
  38.  Chuang, Shu-Hao, Yang, Chih-Sheng, and Wu, Nein-Jon, 1999, “Predictions of Swiring Flow in Sudden-Expansion Dump Combustor With Flameholder Side-Inlet Using Two-Step Combustion Model ”, Int. J. Num Methods Heat and Fluid Flow, Vol. 9, No. 7, pp.764-787 (SCI, EI).
  39. Chuang, Shu-Hao, Suang, Huang-Ming, and Cheng, Bou-Jen, 2000, ” A Various Rectangular Block Effects on an Impinging Twin-Jet Flow Field ”, Shu-Teh J., Vol.25, pp.33-54.
  40. Chuang, Shu-Hao and Nieh, Tsu-Jui, 2000,”Numerical Simulation and Analysis of Three-Dimensional Turbulent Impinging Square Twin-Jet Flow Field with No-Crossflow”, Int. J. Num. Methods Fluids, Vol.33, No. 4, pp.475-498 (EI, SCI).
  41. Chuang, Shu-Hao, Chiang,Jiunn-Shean and Kuo, Yuan-Ming, 2001,”Numerical Simulation of Heat Transfer in a Three-Dimensional Enclosure with Three Chips in Various Position Arrangements”, International Journal of Heat Transfer Engineering (Accepted, will appear at Vol. 24(2), Feb. 2003) (EI).
  42. Chuang, Shu-Hao and Cheng, Dinning-Jia, 2001, ” A Study of Promotion Efficiency of the Domestic Gas Burner ”, J. of Engineering, NCHU, Vol. 12, No. 1, pp.33-50.
  43. Chuang, Shu-Hao and Chiang, Jiunn-Shean, 2001, ” Numerical Simulation and Analysis of Three-Dimensional Turbulent Impinging Twin-Jet Flow with High Temperature Flow and Blocks ” , Trans. of AASRC, Vol. 33, No. 2, pp.87-94 (EI).
  44. Chuang, Shu-Hao and Chiang, Jiunn-Shean, 2001, ” Three-Dimensional Hot Flow Simulation of Turbulent Impinging Twin-Jet, Flow Structure, Block Effect, and Impinging Angle”, J. of Engineering, NCHU, Vol. 12, No. 3, pp.167-178.
  45. Chuang, Shu-Hao, Jiang, Jiunn–Shean, 2001, ”The Effect of Proportional Valve on the Performance of High-Load Water Heater”, Hsiuping J., Vol. 2, pp.59-80.
  46. Chuang, Shu-Hao and Chiang, Jiunn-Shean, 2002, ” Numerical Analysis of Three Dimensional Turbulent Impinging Square Twin-Jet Flowfield Coupled with Cross-Flow ”, Int. J. Num. Methods Fluids (Revised) (EI, SCI).
  47. Chiang, Jiunn-Shean, Chuang, Shu-Hao, and Lee, Hsing-Juin, 2002, “Unveiling the Crucial Role of Impact Energy Loss for So-Called Incompressible Fluid Flow”, Int. J. Num. Methods Fluids (Submitted) (EI, SCI).
  48. Chuang, Shu-Hao, Chiang,Jiunn-Shean and Kuo, Yuan-Ming, 2003, ”Numerical Simulation of Heat Transfer in a Three-Dimensional Enclosure with Three Chips in Various Position Arrangements”, International Journal of Heat Transfer Engineering, Vol. 24(2), 42-59 (SCI, EI).
  49. Chuang, Shu-Hao, Chiang,Jiunn-Shean, and Yan, T. M., 2003, “Numerial Heat Transfer Analysis in a Three-Dimensional Rectangular Vent Duct with Heat Generating Chips”, International comm. in Heat and Mass Transfer (Accepted). (SCI, EI)

  50. Chiang, Jiunn-Shean, Chuang, Shu-Hao, and Lee, Hsing-Juin, 2004, “Unveiling the Crucial Role of Impact Energy Loss for So-Call Incompressible Fluid Flow”, Journal of Marine Science and Technology, Vol. 12, No. 1, pp. 45-52(EI).

  51. Chiang, Jiunn-Shean, Chuang, Shu-Hao, Soon, K. K., and Lee, Hsing-Juin, 2003, “Fuel Efficiency Test of Internal Combustion Engine with Gas-Cushioned Piston”, Trans. Of AASRC(Accepted)(EI).

  52. Chiang, Jiunn-Shean, Chuang, Shu-Hao, Wu, Y. K., “Numerical Simulation of Heat Transfer in a Desktop Computer with Heat-Generating Components”, Int. Comm. In Heat and Mass Transfer(Accepted)(SCI, EI).


研討會論文

  1. Chuang, Shu-Hao, and Hong, Zuu-Chang, 1986, "Kinetic Theory Approach of the Multiple Jets Turbulent Mixing Analysis", Proc. of the 10th Nat. Conf. on Theo. and Appl. Mech, Soc. of Theo. and Appl. Mech. of the R.O.C., Kaohsiung, pp.43-54.
  2. Hong, Zuu-Chang, and Chuang, Shu-Hao, 1986, "Kinetic Theory Approach of the Twin Plane Jets HF Chemical Laser Properties Analysis", Proc. of the Third Nat. Conf. on Mech. Eng., CSME, Chung-Li, Taiwan, R.O.C., pp.127-141.
  3. Chuang, Shu-Hao, and Hong, Zuu-Chang, 1986, "Synthetical Analysis of Various Plane Jets Turbulent Mixing", Proc. of the Third Nat. Conf. on Mech. Eng., CSME, Chung-Li, Taiwan, R.O.C., pp.37-45.
  4. Chuang, Shu-Hao, 1987, "HF Chemical Laser Properties Analysis of Multiple Plant Jets", Proc.1987 Symp. on Trans. Phen. and Appl., Nat. Taiwan U., Taipei, Taiwan, R.O.C., pp.223-228.
  5. Chuang, Shu-Hao, and Wang, Chin-Sheng, 1988, "Numerical Analysis of an Impinging Jets as a Function of Position", Proc. 1988 Symp. on Trans. Phen. and Appl., Nat. Taiwan Institude of Taiwan, Technology, Taipei, Taiwan, R.O.C., pp.233-238.
  6. Chuang, Shu-Hao, and Chen, Yu-Cheng, 1988, "A Backward-Facing Step Flow Analysis via Discrete Vortex Method", Proc. 1988 Symp. on Trans. Phen. and Appl., Nat. Taiwan Institute of Technology, Taipei, Taiwan, R.O.C., pp.95-100.
  7. Chuang, Shu-Hao, Lii, Shen-Wu, and Hong, Zuu-Chang, 1988, "Combustion Flowfield Analysis of an Afterburner with V-Gutter Flameholders", Proc. of the Fifth Nat. Conf. of the CSME, Taipei, Taiwan, R.O.C.,pp.243-252.
  8. Chuang, Shu-Hao, and Wang, Chin-Sheng and Hsiao, Fei-Bin, 1988, "Numerical Analysis of the Impinging Jet with an Upper Plate", Proc. of the Fifth Nat. Conf. of the CSME, Taipei, Taiwan, R.O.C., pp.75-84.
  9. Chuang, Shu-Hao, and Jiang, Jiunn-Shean, 1988, "Diffusion Flame Analysis of an Afterburner on a Varying Air-Fuel Ratio", Proc. of the 12th Nat. Conf. on Theo. and Appl. Mech., Soc. of Theo. and Appl. Mech. of the R.O.C., Taipei, pp.223-232.
  10. Chuang, Shu-Hao, Wei, Ching-Yuan, and Chang, Yih-Fong, 1989, "Numerical Simulation of an Oblique Impinging Jet on a Ground Surface", Proc. 1989 Symp. on Trans. Phen. and Appl., Nat. Taiwan U., Taipei, Taiwan, R.O.C., pp.125-131.
  11. Chuang, Shu-Hao, and Lin, Song-Yih, 1989, "Effects of Fuel Sparger on and Afterburner Flowfield", Proc. 1989 Symp. on Trans. Phen. and Appl., Nat. Taiwan, R.O.C., pp.291-297.
  12. Chuang, Shu-Hao, and Sung, Hong-Ming, 1989, "Swirling Flow Analysis of Sudden Expension Dump Combustor with a V-Gutter Flameholder", Proc. 1989 Symp. on Trans. Phen. and Appl., Nat. Taiwan U., Taipei, Taiwan, R.O.C., pp.299-305.
  13. Chuang, Shu-Hao, and Jiang, Jiunn-Shean, 1989, "Combustion Flow Analysis of an Afterburner with Different Shape of Flameholder", Proc. 1989 Symp. on Trans. Phen. and Appl., Nat. Taiwan U., Taipei, pp.355-361.
  14. Chuang, Shu-Hao, and Kuo, Hung-Pin, 1990, "Diffusion Flame Analysis of an Afterburner with Two Fuel-Ring Spargers as a Function of Position", Proc.1990 Symp. on Trans. Phen. and Appl., Nat. Taiwan U., Taipei, pp.169-175.
  15. Chuang, Shu-Hao, and Jan, Jin-Fa, 1990, "Cooling Effect of the Impregnating Side-Inlet on the Combustion Flow of Sudden-Expansion Dump Combustor", Proc.1990 Symp. on Trans. Phen. and Appl., Nat. Taiwan U., Taipei, pp.299-304.
  16. Chuang, Shu-Hao, and Chen, Ming-Hua, 1990, "Numerical Simulation of Two-Dimensional Impinging Twin-Jet on a Ground Surface", The Seventh Nat. Conf. On Mech. Eng., CSME, Hsinchu, Taiwan, R.O.C., pp.499-506.
  17. Chuang, Shu-Hao, Kuo, Hung-Pin, and Lin, Cheng-Kuang, l990, "Diffusion Flame Analysis of an Afterburner with Two Fuel-Ring Spargers as a Function of the Pitch", The Seventh Nat. Conf. On Mech. Eng., CSME, Hsinchu, Taiwan, R.O.C., pp.27-34.
  18. Chuang, Shu-Hao, Chen, Ming-Hua, and Lii , Shen-Wu, 1990, "Numerical Simulation of an Impinging Twin-Jet with Cross Flow", Proc. of the 14th Nat. Conf. on Theo. and Appl. Mech., Soc. of Theo. and Appl. Mech. of the R.O.C., Chung-Li, pp.1117-1124.
  19. Chuang, Shu-Hao, and Woo, Nan-Jou, 1990, "The effect of Cooling Fluid on the Combustion Flow of Sudden-Expansion Combustion with Swirling", 中華民國太陽能學會第十屆學術研討會，國立中山大學，高雄市，pp.81-90.
  20. 莊書豪，郭宏賓，呂省吾，1990，"噴油環對後燃器燃燒流場效應分析"，中國航太學會學術研討會，台北市，pp.1043-105l.
  21. 莊書豪，吳念祖，199l，"實用V型駐燄器對側進冷卻流場之突張式燃燒室渦漩流場效應分析"，中華民國第一屆燃燒科技學術研討會論文集，pp.75.
  22. 吳念祖，王元仁，林訓正，莊書豪，1991，"中心駐燄器與渦漩效應對突張燃燒室流場之分析"，輸送現象與其應用專題研討會，台北市，pp.237-243.
  23. Chuang, Shu-Hao, Wu, Nein-Jou, Wang, Yuan-Gen, and Chen, Ming-Hua, 1991, "Predictions of Swirling Flow in Sudden-Expansion Dump Combustor with Flameholder and Side-Inlet Using two Step-Combustion Model",The Eighth Nat. Conf. on Mech. Eng., CSME, Taipei, Taiwan, R.O.C., pp.633-640.
  24. 莊書豪，鄭博仁，1991，"表面具塊狀阻物之雙噴射撞擊流場分析"，中國航空太空學會第三十三屆年會學術研討會，台北市，pp.225-238.
  25. Chen, M.H., Chuang, S.H., Lin, H.C,. and Wu, N.J., 1991, "Numerical Study of Coaxial Swirling Flows in Ramjet Dump Combustor with Central Flameholder", The Fifteenth Nat. Conf. on Theo. and Appl. Mech., Tainan, Taiwan, R.O.C., pp.647-655.
  26. Chuang, Shu-Hao, Jan, Jin-Fa, and Lin, Hsun-Cheng, 1991, "具多孔側進冷卻流體之突張式燃燒室流場分析", J. of Feng-Cheng, U., Taichung, Vol.24, pp.121-146.
  27. 莊書豪，黃文良，1992，"二步化學在具V型駐燄器之後燃器熱流場分析"，中華民國第二屆燃燒科技應用研討會，台南市，pp.357-362.
  28. 莊書豪，鄭博仁，1992，"雙噴射撞擊熱流場分析"，中華民國第二屆燃燒科技應用研討會，台南市，pp.647-655.
  29. 莊書豪，鄭博仁，陳明華，1992，"具可移動上平板之雙噴射撞擊暫態熱流場分析"，中國航空太空學會第一屆計算流體力學研討會，AASRC-92-054, pp.471-475.
  30. 江俊顯，黃文良，莊書豪，1992，"具V型駐燄器之後燃器漩渦熱流場分析"，輸送現象與其應用專題研討會，台北市，pp.129-136.
  31. 宋鴻明，鄭博仁，莊書豪，1992，"雙噴嘴出口之雷諾數對垂直或短程起降飛機起飛流場之探討"，輸送現象與其應用專題研討會，台北市，pp.129-136.
  32. 莊書豪，鄭博仁，陳明華，1992，"具可移動上平板之雙噴射撞擊暫態熱流場分析"，Proc. of 1st Nat. Conf. on CFD, ASSRC., pp.471-475.
  33. 莊書豪，鄭博仁，陳明華，1992，"具橫向流之雙噴射撞擊暫態熱流場之研究"，中華民國機械工程學會第九屆學術研討會，高雄市，pp.73-80.
  34. 莊書豪，陳明華，張原銘，1992，"具壁面效應翼部面之格點規劃及流場分析"，中華民國力學學會第十六屆全國力學會議，基隆市，pp.41-48.
  35. Chuang, Shu-Hao, Chen, Ming-Hua, and Cheng, Bou-Jen, 1992, "Numerical Study of Moving Twin-Jet in Ground Effect", Proc. of the 16th Nat. Conf. on Theo. and Appl. Mech., Keelung, R.O.C., pp.49-56.
  36. 莊書豪，鄭東辰，1993，"壁面效應對翼部面黏性流場之影響分析"，Proc. of the Tenth Nat Conf. of the CSME, Hsinchu, Taiwan., R.O.C., pp.1-10.
  37. 莊書豪，黃金臺，宋鴻明，1993，"用κ-ε紊流修正模式分析具駐燄器之突張式燃燒式漩渦流場"，中國航空太空學會第二屆計算流體力學研討會，pp.329-337.
  38. 莊書豪，曾偉文，1993，"區劃空間火災燃燒溫度場之數值模擬與分析"，中國航空太空學會第二屆計算流體力學研討會，pp.593-600.
  39. 莊書豪，賴文弘，江俊顯，郭宏賓，1993，"二維矩形空間具部份加熱面及冷壁面之自然對流數值分析"，中國航空太空學會第二屆計算流體力學研討會，pp.553-560.
  40. 莊書豪，吳守仁，1994，"噴射撞擊流場數值模擬分析"，中國機械工程學會第十一屆全國學術研討會，台中市，pp.119-128.
  41. 莊書豪，郭正雄，黃興杰，1994，"簡諧振動之雙三角翼上方渦漩結構特性探討"，中華民國第十八屆全國力學會議，新竹市，pp.61-68.
  42. 莊書豪，侯憲廷，郭正雄，林正光，1994，"軸對稱V型駐燄器尾流冷流場之特性研究"， 中國航空太空第三十六屆學術研討會，新竹市，pp.435-442. (NSC84-0210-D-005-001)
  43. 莊書豪，程頂嘉，1994，"提升液化天然氣瓦斯爐熱效率之研究"，中國機械工程學會第十一屆全國學術研討會，台中市，pp.277-285.
  44. 莊書豪，馮元洲 ，1995，"中心錐體對V型環狀軸對稱駐燄器尾流流場影響之探討"， 中國機械工程學會第十二屆全國學術研討會，嘉義縣，pp.275-284.
  45. 莊書豪，張自發，1995，"地表面具凹凸不平塊狀阻物之雙噴射撞擊流場分析"，第三屆全國計算流體力學研討會，日月潭，pp.103-110.
  46. 莊書豪，巫俞賢， 1995，"750-400雙三角翼上方渦漩結構靜態與動態特性之研究"，中國航空太空學會第三十七屆學術研討會，台北縣，pp.219-228. (NSC82-0424-E-005-095)
  47. 莊書豪，洪士翰，1995，"微重力場下封閉空間中具發熱分隔板之自然對流流場和熱傳效應分析"，中華民國力學學會第十九屆全國力學會議，桃園縣，pp.59-68.
  48. 莊書豪，張自發，1995，"各種地表面對具有橫向流之雙噴射撞擊流場影響分析"，中國機械工程學會第十二屆全國學術研討會，嘉義縣，pp.95-104.
  49. 郭正雄，詹銘斯，莊書豪，1995，"大振幅搖擺機翼上方渦漩結構演化之探討"，中國機械工程學會第十二屆全國學術研討會，嘉義縣，pp.173-182(NSC85-2212-E-005-019).
  50. Chuang, Shu-Hao, and Cheng, Bou-Jen, 1995, "Numerical Study of Moving Twin-Jet in Ground Effect", First Asian CFD Conference, Hong Kong, Jan. 16-19, pp.155-160.
  51. Chuang, Shu-Hao, Jiang, Jiunn-Shean, and Liu, Min-Shan, 1996, "Swirling Flows Analysis of an Afterburner for Mulitple-Side-Inlet Cooling Fluids with Two-Step Combustion Model", The Second Asian Computational Fluid Dynamics Conference (ACFD2), University of Tokyo, Dec. 15-18, pp.409-414.
  52. Chuang, Shu-Hao, Lou, M. S., and Jiang, J. S., 1996, "Hot Flow of Transient-State of Twin-Jet Impingement on a Regular Ground", Proceedings of the 20th Nat. Conf. on Theo. and Appl. Mech., pp.302-309.
  53. Chuang, Shu-Hao, and Lee, J. C., 1996, "Investigations of Wake-Airfoil vortices on Sinusoidally Pitching Airfoil Flow", The 38th Conf. on Aero. and Astronautics, R.O.C., pp.11-18(NSC85-2212-E-005-019).
  54. Chuang, Shu-Hao, and Lee, Tzu-Chiang, 1996, "Investigations of Vortical Structures on Cropped Double Delta Wing", Proceedings of the 13th National Conference of the CSME, pp.91-98.
  55. Chuang, Shu-Hao, and Zhueng, Iou-Zheng, 1997, "Study of the Desirable Combustion and Thermal Efficiency of Domestic NG Appliance for Burner Heads", Proceedings of the 21th National conference on theoretical and Applied Mechanics, Taichung, Taiwan, R.O.C., pp.73-80.
  56. Chuang, Shu-Hao, and Wu, Jai-Rong, 1997, "Investigations of Wavy Vortex Array on Sinusoidally pitching airfoil flow", Proceedings of the 21th National conference on theoretical andApplied Mechanics, Taichung, Taiwan, R.O.C., pp.243-250. (NSC85-2212-E-005-020)
  57. Chuang, Shu-Hao, and Wang, Fuh-Jeng, 1997, "Experimental study on High-Load water heater performance", Proceedings of the 14th National conference on Mechanical engineering, the Chinese Society of Mechanical Engineers, CHUNG-Li, Taoyuan, Taiwan, R.O.C., pp.272-279. (NSC87-2212-E-005-025)
  58. Chuang, Shu-Hao and Jiang, Jiunn-Shean, 1998, “Numerical Simula­tion and Analysis of Three-Dimensional Turbulent Impinging Twin-Jet Flowfield”, The Third Asian computational Fluid Dynamics Con­ference, Bangalore, India, pp.372-377.
  59. 莊書豪，江俊顯，黃奇課，1998，“三維紊流雙噴射撞擊流場數值模擬”，第五屆全國計算流體力學學術研討會，桃園大溪。
  60. 莊書豪，江俊顯，黃奇課，1998，“具阻塊之三維高溫紊流雙噴射撞擊流場分析”，第廿二屆中華民國力學會議學術研討會，台南市, pp.221-228.
  61. 莊書豪，郭原裕，黃國金，1998，“比例閥參數對高負荷熱水器之影響分析”，第二十二屆中華民國力學會議學術研討會，台南市, pp.229-236.
  62. 莊書豪，陳俊哲，蕭世恭， 1998，“瓦斯爐頭參數對爐具之影響分析”，中國機械工程學會第十五屆全國學術研討會，台南市, pp.447-454.
  63. 莊書豪，謝慶東，黃國金，1998，“高負荷熱水器之強制燃燒系統分析”，中國機械工程學會第十五屆全國學術研討會，台南市, pp.487-494.
  64. 莊書豪，江俊顯，黃奇課，1998，“橫向流對三維高溫紊流雙噴射撞擊流場之影響分析”，中國航空太空學會第四十屆全國學術研討會，台中市, pp.63-70.
  65. 莊書豪，林錦春，周詩頻，1998，“抗風排氣筒之最佳化參數分析研究”，中國航空太空學會第四十屆全國學術研討會，台中市, pp.41-48.
  66. 莊書豪，鍾佑政，1998，”一步與二步反應燃燒模式在突張式燃燒室之比較分析”，Proceeding Symposium on Transport Phenomena and Applications, Taipei, pp.119-122.
  67. 莊書豪，江俊顯，楊智勝，1999，”具橫向流之二維雙矩形噴射射撞擊流場數值模擬”，電子計算機於土木水利工程應用研討會，台中市，pp.1567-1576.
  68. 莊書豪，江俊顯，魏宏任，1999，”不同噴嘴位置對高負荷燃燒器流場之影響”，Proceeding of the 1999 Annual Meeting and Conferences on Transport Phenomena and Applications，高雄市， pp.309-312. (NSC89-2212-E-005-015)
  69. 莊書豪，陳怡舟，鍾佑政，1999，”不同阻塊排列方式對三維噴射撞擊流場之影響分析”，中國機械工程學會第十六屆學術研討會，新竹市，pp.57-64.

  70. 莊書豪，郭宏賓，郭育銘，1999，”具三顆發熱晶片之三維封閉空間熱傳分析”，第二十三屆中華民國力學會議學術研討會.新竹市，pp.17-24.

  71. 莊書豪，顏聰明，2000，”三維矩形渠道內具有發熱原件之熱傳分析”，第二十四屆中華民國力學會議學術研討會，中壢市, A28.

  72. 莊書豪，鍾毓偉，2000，”具連續移動平板之三維紊流噴射撞擊流場之熱傳數值分析”，第二十四屆中華民國力學會議學術研討會，中壢市, B34.

  73. 江俊顯，莊書豪，2000，”混合控制燃燒模式於氣渦輪燃燒式之應用”，2000輸送現象及應用專題研討會，台北市, pp.337-340.

  74. 莊書豪，沈紅佑，2000，”高負荷燃燒器燃氣混合之數值模擬分析”，中國機械工程學會第十七屆學術研討會(NSC 89-2212-E005-015)，高雄縣, pp.205-212.

  75. Chuang, Shu-Hao and Chung, Yu-Cheng, 2000, “Numerical Analysis of High-Load Burner Flow”, International Conference on Applied computational Fluid Dynamics, ACFD 2000, October 17-20, Beijing, China, pp.367-374.

  76. 莊書豪，江俊顯，鍾毓煒,2001, “噴嘴不同排列方式對連續移動平板之熱傳效應數值分析”,2001 CIROC  CSCA  AASRC  Joint Conference.

  77. Chuang, Shu-Hao and Kuo, Huug-Bin, 2001, “Numerical Analysis of Convetive Heat Transfer of 3-D Turbulent Impinging Jets ”, 2001 PICAST 4 Conference, May 21-23, Kaohsiung.

  78. Jiang, Jiunn-Shean and Chuang, Shu-Hao, 2001, “Effect of Different Combustion Model on Turbulent Reacting Flow in Gas Turbine Combustor ”, 2001 PICAST 4 Conference, May 21-23, Kaohsiung.

  79. 莊書豪，郭宏賓，陳佩孚，2001，“三維多孔間隙隔板通道之紊流熱傳數值模擬分析”，第八屆全國計算流體力學學術研討會，宜蘭縣.

  80. 莊書豪，江俊顯，蔡振田，2002，“小型冷卻風扇性能數值模擬分析“, 中國機械工程學會第十九屆學術研討會，雲林縣.

  81. 莊書豪，鍾佑政，洪培裕，2002，“小型冷卻風扇性能改良之研究“, 中國機械工程學會第十九屆學術研討會，雲林縣.

  82. 江俊顯，莊書豪，2002，“同軸三維非穩態突擴燃燒室流場結構之分析“, proceedings 2002 symposium on Transport phenomena and Applications, Taipei, pp.257-260.

專書

1. “材料力學”  高立圖書公司

2. “工程力學”  科技圖書公司

3. “流體力學”  高立圖書公司

4. “古典熱力學”  徐氏基金會

　

參加國際學術研討會

系所

教師姓名

參加國際學術研討會議名稱

主辦之國際學術團體單位

期間

年月日~年月日

參與擔任職位之性職

經費補助情形

機械系

莊書豪

The Third Asian computational Fluid Dynamics Con­ference

ACFD

1998

發表論文

國科會補助

機械系

莊書豪

Numerical Analysis of High-Load Burner Flow”, International Conference on Applied computational Fluid Dynamics

 

ACFD

2000

發表論文

國科會補助

機械系

莊書豪

Numerical Analysis of Convective Heat Transfer of 3-D Turbulent Impinging Jets

2001 PICAST 4 Conference

2001

發表論文

 

機械系

莊書豪

Effect of Different Combustion Model on Turbulent Reacting Flow in Gas Turbine Combustor

2001 PICAST 4 Conference

2001

發表論文